Kia Telluride: Wipers and washers / Rear windshield wiper and washer operation
The rear windshield wiper and washer switch is positioned at the end of the wiper control lever for convenient operation.
-
Turn the switch to the desired setting to operate the rear wiper and washer.
-
HI: Normal rear wiper operation
-
LO: Intermittent rear wiper operation
-
OFF: Rear wiper off
-
-
Push the lever away from you to spray washer fluid onto the rear glass and operate the rear wiper several times.
The washer spray and rear wiper operation will continue until the lever is released.
When the front wipers are operating and the vehicle is shifted into R (Reverse), the rear wiper may activate once to improve rear visibility.
The rear wiper operates while the Kia Telluride is in R (Reverse) with the front wiper switched on.
Select Setup > Vehicle > Convenience > Auto Rear Wiper (in R) from the infotainment system to adjust this function.
Windshield washer operation
Set the wiper speed control switch to the OFF position before using the washer system...
Camera cleaning system
If the rear camera lens becomes dirty, the image shown on the display may appear unclear or blurred. Use the washer system to help clean the camera and restore better rear visibility...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Safe AWD operation
Before driving Mastering the dynamics of an All-Wheel Drive (AWD) vehicle is essential for confident driving. Do not rely exclusively on your habits from conventional Front-Wheel Drive (FWD) vehicles; the Kia Telluride AWD system provides different handling characteristics, meaning you must drive at more moderate speeds when in AWD mode to maintain full control.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Declaration of conformity
The radio frequency components (Front Radar) comply: For United States and United States territories For Canada The radio frequency components (Front Corner Radar/Rear Corner Radar) comply:: (if equipped) For United States and United States territories For Canada