Kia Telluride: Lane Keeping Assist (LKA) / Lane Keeping Assist settings
Lane Safety
|
|
While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Safety on the infotainment screen to configure the Lane Safety settings.
Lane Safety: When the system detects that your Kia Telluride is about to leave its lane unintentionally, it can provide steering assistance to help keep the vehicle within the lane boundaries. If the vehicle crosses a lane marking, the system also issues an audible alert together with steering wheel vibration. If Lane Safety is deselected, the Lane Safety indicator (
) turns OFF.
WARNING
Even when Lane Safety is disabled, the driver remains fully responsible for monitoring road conditions, maintaining proper lane position, and steering the vehicle safely at all times.
NOTE
-
If you press and hold the Lane Driving Assist button (
) for more than two seconds to switch off Lane Keeping Assist, the Lane Safety setting is also turned off. -
The Lane Keeping Assist setting is retained even after the engine is turned off and restarted, so it will return to the previously selected state.
CAUTION
-
Towing a trailer or installing a cargo carrier may affect vehicle stability. If necessary, disable the function and operate your Kia Telluride with additional caution.
-
Do not rely on the system while towing another vehicle or when equipment that could influence sensor performance or vehicle balance is installed, as proper operation cannot be guaranteed.
-
When a trailer or carrier is connected, configure the trailer or carrier menu if available. Whether the connection is detected automatically using genuine Kia equipment or selected manually by the driver, certain driver assistance functions may become limited. Refer to the Driver Assistance System limitations and always drive carefully.
TIP
Pressing the Lane Driving Assist button (
) switches OFF Lane Keeping Assist and disables the Lane Safety function.
Warning Methods
|
|
|
To customize the Warning Methods while the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment display. The following options are available:
-
Warning Volume: Adjusts the loudness of the audible driver assistance alerts.
-
Haptic Warning: Turns ON steering wheel vibration notifications.
-
Lane Safety Warning Sound: Allows the Lane Safety warning sound to be turned OFF when Haptic Warning is ON.
-
Driving Safety Priority: Automatically lowers the volume of other audio sources whenever a Driving Safety warning is issued.
TIP
-
The selected Warning Methods may also be shared by other driver assistance features installed on your Kia Telluride.
-
Your chosen Warning Methods are saved and remain in effect after the vehicle is turned OFF and restarted.
-
Depending on the vehicle specification, the Warning Methods menu may not be available.
-
The Lane Safety Warning Sound can only be configured when both Warning Volume and Haptic Warning are enabled.
Lane Keeping Assist (LKA)
When driving above the required operating speed, Lane Keeping Assist (LKA) monitors lane markings or the edge of the roadway using the front camera. If the Kia Telluride begins to drift out of its lane without the turn signal being activated, the system can provide steering assistance to help guide ..
Lane Keeping Assist operation
Turning Lane Keeping Assist ON and OFF To switch Lane Keeping Assist ON or OFF, press and hold the Lane Driving Assist () button on the steering wheel for more than two seconds while the vehicle is ON...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Indicator lights
Electronic Stability Control (ESC) indicator light This indicator light operates under the following conditions: It illuminates for approximately 3 seconds after the ENGINE START/STOP button is switched to the ON position as part of the normal self-check procedure.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Applying the parking brake
Applying the parking brake with EPB switch Firmly depress the brake pedal. Pull the EPB switch upward. Verify that the brake warning indicator illuminates, confirming that the Electronic Parking Brake has been engaged.