Kia Telluride: Electronic Parking Brake (EPB) / Applying the parking brake
Applying the parking brake with EPB switch
|
-
Firmly depress the brake pedal.
-
Pull the EPB switch upward.
-
Verify that the brake warning indicator illuminates, confirming that the Electronic Parking Brake has been engaged.
If the AUTO HOLD function is active when the Kia Telluride is turned off, the EPB will engage automatically. You can also apply the Electronic Parking Brake manually by pulling up the EPB switch after switching the vehicle off.
WARNING
Never leave children or pets unattended inside your vehicle. They may unintentionally cause the Kia Telluride to move by:
-
Releasing the parking brake.
-
Shifting the transmission out of P (Park).
-
Starting the engine.
-
Operating switches, pedals, or other vehicle controls.
TIP
-
If your Kia Telluride does not remain completely stationary on a steep incline or while towing a trailer, increase the parking brake clamping force by performing the following:
-
Apply the EPB.
-
Continue holding the EPB switch upward for more than 3 seconds.
-
-
Never apply the EPB while the vehicle is moving unless it is necessary during an emergency.
-
You may hear a clicking sound or the electric brake motor operating while the EPB is applied or released. These sounds are normal and indicate that the system is functioning correctly.
Automatic application of EPB
The EPB is automatically applied under the following conditions:
-
The transmission is shifted into P (Park) while the vehicle is on an incline.
-
The vehicle is turned off while AUTO HOLD remains activated.
-
The vehicle moves slightly while it is already in P (Park).
-
While AUTO HOLD is active:
-
The driver's door is opened.
-
The hood is opened.
-
The liftgate is opened.
-
The vehicle remains stopped on a steep incline for approximately 10 minutes or longer.
-
-
Another vehicle control system requests automatic application of the EPB.
TIP
On Kia Telluride models equipped with both EPB and AUTO HOLD, the Electronic Parking Brake is automatically engaged when the vehicle is switched to the OFF position while AUTO HOLD remains active. Turn off AUTO HOLD before switching the vehicle off if automatic EPB engagement is not desired.
Emergency braking with the EPB switch
If the service brake cannot be used while driving, you can perform emergency braking by pulling up and continuously holding the EPB switch.
The emergency braking function remains active only while the EPB switch is being held.
WARNING
Do not use the EPB to stop the Kia Telluride during normal driving except in an emergency. Applying the Electronic Parking Brake at regular driving speeds may result in a sudden loss of vehicle control, increasing the risk of an accident that could lead to serious injury or death. If emergency braking becomes necessary, operate the system carefully and maintain full control of the vehicle.
TIP
During emergency braking, the brake warning indicator illuminates to show that the EPB system is actively assisting with vehicle deceleration.
If the EPB has been used for emergency braking, have your Kia Telluride inspected by an authorized Kia dealer as soon as possible.
Electronic Parking Brake (EPB)
After parking your Kia Telluride, always apply the EPB to help prevent the vehicle from moving due to external forces such as road grade or unintended vehicle movement...
Releasing the parking brake
Releasing the parking brake with EPB switch Turn the vehicle on. Firmly depress the brake pedal...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Rear Cross-Traffic Collision-avoidance Assist operation
Rear Cross-Traffic Collision-avoidance Assist warns the driver and may help control the vehicle according to the level of collision risk detected while the Kia Telluride is reversing. The system operates through the following stages: Collision Warning Emergency Braking Stopping the vehicle and ending brake control Collision Warning Collision Warning Collision Warning alerts the driver with a warning light on the outside rearview mirror, a warning message on the instrument cluster, an audible alert, and steering wheel vibration.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Scheduled maintenance service
Scheduled maintenance service precautions Adhere strictly to the standard Normal Maintenance Schedule provided that your vehicle is routinely operated under typical, moderate driving conditions. However, you should transition to the Maintenance Under Severe Usage Conditions framework if your daily driving routine frequently involves any of the following specific operating environments: A: You repeatedly drive short distances covering less than 5 miles (8 km) under normal ambient temperatures, or short trips of less than 10 miles (16 km) in freezing sub-zero weather conditions.