Kia Telluride: Electronic Parking Brake (EPB) / Instrument cluster display for warning message
The instrument cluster in your Kia Telluride displays the following Electronic Parking Brake (EPB) warning messages whenever the corresponding operating conditions are detected.
An EPB warning message accompanied by an audible alert may appear under the following circumstances:
-
You press the accelerator pedal while the EPB is still engaged, but the system is unable to release the parking brake automatically.
-
You attempt to drive with the EPB applied and automatic release does not occur. In this case, a warning message and chime notify you that manual intervention is required.
|
|
Firmly depress the brake pedal and manually release the EPB using the EPB switch.
WARNING
Parking brake use
-
Never allow passengers or anyone unfamiliar with your Kia Telluride to operate the EPB switch. An unintended release of the parking brake may allow the vehicle to move unexpectedly, creating a risk of serious injury or death.
-
Whenever the vehicle is parked, always ensure that the parking brake is fully applied to help prevent unintended vehicle movement that could endanger occupants or nearby pedestrians.
-
You may hear a clicking sound or the electric brake motor operating while the EPB is being applied or released. These sounds are normal and indicate proper Electronic Parking Brake operation.
-
If you leave your Kia Telluride with a valet or parking attendant, explain the correct procedure for operating the EPB.
-
Driving with the EPB engaged may lead to improper system operation and excessive brake wear.
-
When the parking brake releases automatically after pressing the accelerator pedal, apply throttle smoothly to ensure a controlled vehicle launch.
If the transition from AUTO HOLD to EPB does not operate correctly, the following warning message and audible alert appear:
|
|
TIP
If this message appears, press the brake pedal to deactivate AUTO HOLD before continuing to drive.
If the EPB is automatically engaged while AUTO HOLD is active due to an Electronic Stability Control (ESC) intervention, the system displays the following message together with an audible warning:
|
|
Releasing the parking brake
Releasing the parking brake with EPB switch Turn the vehicle on. Firmly depress the brake pedal...
EPB malfunction indicator
When the vehicle is switched to the ON position and the Electronic Parking Brake system is operating normally, the indicator light shown below illuminates briefly for approximately three seconds before turning off...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Surround View Monitor malfunction and limitations
Surround View Monitor malfunction If Surround View Monitor malfunctions, the image on the display may appear green, blue, black, distorted, or otherwise abnormal. Have the Kia Telluride inspected by an authorized Kia dealer if Surround View Monitor does not operate correctly, if the screen flickers, or if the camera image is not displayed properly.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Intelligent Speed Limit Assist settings. Speed Limit
Speed Limit Driver Assistance Speed limit Speed limit assist Speed limit warning Off While the vehicle is ON, open Setup > Vehicle > Driver Assistance > Speed Limit on the infotainment screen to configure the available Intelligent Speed Limit Assist settings.