Kia Telluride: Electronic Parking Brake (EPB) / EPB malfunction indicator
When the vehicle is switched to the ON position and the Electronic Parking Brake system is operating normally, the indicator light shown below illuminates briefly for approximately three seconds before turning off.
|
If the EPB malfunction indicator illuminates while driving, or fails to illuminate during the normal self-check when the vehicle is placed in the ON position, the Electronic Parking Brake system may require inspection. Have your Kia Telluride checked by an authorized Kia dealer as soon as possible.
If the ESC warning indicator is illuminated because the Electronic Stability Control system has a malfunction, the EPB malfunction indicator may also illuminate. This does not necessarily indicate a fault with the Electronic Parking Brake itself.
NOTE
The EPB warning light may illuminate if the EPB switch operates abnormally. Turn the engine off, wait several minutes, and restart the vehicle. If the warning disappears, the switch has returned to normal operation. If the warning remains illuminated, have your Kia Telluride inspected by an authorized Kia dealer.
If the EPB warning light flashes or does not illuminate after pulling up the EPB switch, the Electronic Parking Brake has not been successfully applied.
If the warning light continues to blink, press the EPB switch down, then pull it upward again. If the indicator still does not turn off, have the vehicle inspected by an authorized Kia dealer.
When the EPB is not released
If the EPB cannot be released normally, do not attempt to drive the vehicle. Transport your Kia Telluride on a flatbed tow truck and have the Electronic Parking Brake system inspected by an authorized Kia dealer.
Instrument cluster display for warning message
The instrument cluster in your Kia Telluride displays the following Electronic Parking Brake (EPB) warning messages whenever the corresponding operating conditions are detected...
AUTO HOLD
The AUTO HOLD feature automatically keeps your Kia Telluride stationary after it has come to a complete stop, allowing you to remove your foot from the brake pedal while the vehicle remains securely held in place until you are ready to drive again...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Economical operation
The fuel economy of your Kia Telluride depends largely on how, where, and when you drive. Driving habits, road conditions, traffic, vehicle load, and maintenance condition all affect fuel consumption. To operate your vehicle as efficiently as possible and help reduce fuel and repair costs, follow these driving recommendations: Drive smoothly and accelerate at a moderate rate.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Navigation-based Smart Cruise Control settings. Auto Highway Speed Change
Auto Highway Speed Change Driver Assistance Driving Convenience Auto Highway Speed Change While the vehicle is ON, open Setup > Vehicle > Driver Assistance > Driving Convenience > Auto Highway Speed Change on the infotainment display to configure this feature.