Kia Telluride owner’s manuals & service informationIndependent reference library

Kia Telluride: Highway Driving Assist (HDA): (if equipped) / Highway Driving Assist malfunction and limitations

Highway Driving Assist malfunction

Kia Telluride Highway Driving Assist system warning display
  1. Check Driver Assistance system

If Highway Driving Assist does not function correctly, the Master warning light (Kia Telluride Master warning indicator icon) illuminates on the instrument cluster, accompanied by a warning message that remains visible for several seconds. If this warning appears, have the Kia Telluride inspected by an authorized Kia dealer as soon as possible to restore proper Highway Driving Assist operation.

WARNING

  • The driver is always responsible for maintaining full control of the vehicle and operating it safely under all traffic and road conditions.

  • Keep both hands on the steering wheel whenever Highway Driving Assist is active or available.

  • Highway Driving Assist is designed to support the driver, not replace attentive driving. It is not an autonomous driving system and cannot make decisions in every situation. Always monitor surrounding traffic and be prepared to intervene immediately.

  • Maintain continuous attention to the road. Compliance with traffic laws and safe vehicle operation remain entirely the driver's responsibility. Kia Telluride driver assistance systems cannot prevent every violation or accident.

  • Highway Driving Assist may not detect every roadway condition or traffic hazard. Because of system limitations, it may fail to recognize certain vehicles, motorcycles, bicycles, pedestrians, roadside structures, guardrails, toll booths, or unexpected obstacles. Always observe your surroundings carefully.

  • Highway Driving Assist automatically turns OFF in situations including:

    • Driving on roads where the function is not supported, such as rest areas, intersections, highway junctions, or similar locations.

    • Temporary interruptions of the navigation system, including software updates, restarts, or other navigation-related issues.

  • Depending on road geometry, navigation information, weather, or surrounding traffic, Highway Driving Assist may activate unexpectedly, provide limited assistance, or automatically switch OFF.

  • Lane Following Assist may become temporarily unavailable whenever lane markings cannot be recognized clearly or a hands-off warning is displayed.

  • Warning sounds may be difficult to hear in particularly noisy driving environments.

  • When negotiating curves at higher speeds, the Kia Telluride may move closer to one side of the lane or approach the lane boundary. Always maintain steering control.

  • If you are towing a trailer or another vehicle, switch Highway Driving Assist OFF before driving.

  • The timing of the hands-off warning may vary depending on steering input, road surface conditions, and vehicle movement. Do not rely on the warning as a reminder to hold the steering wheel.

  • Read and understand the Kia Telluride owner's manual before using Highway Driving Assist so you are familiar with its operation and limitations.

  • Highway Driving Assist is unavailable immediately after the vehicle is started or whenever the navigation system or detection sensors are initializing.

TIP

You can review Highway Driving Assist warnings and diagnostic information in the Service Message section of the Utility Information view on the instrument cluster.

Limitations of Highway Driving Assist

Highway Driving Assist and Highway Lane Change Assist may function differently than expected or become temporarily unavailable under the following conditions:

NOTE

For additional information regarding the operating characteristics and limitations of the front camera, front radar, front corner radar, and rear corner radar sensors, refer to the Forward Collision-avoidance Assist (FCA) (Sensor Fusion) section.

Highway Lane Change Assist (if equipped)

Display and control The status of the Highway Lane Change Assist system in your Kia Telluride is conveniently monitored directly through the instrument cluster...

This device complies with Part 15 of the FCC rules.

Operation of this device is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that could result in undesired operation...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: How does the air bag system operate?

Air bags are capable of deploying only when the ENGINE START/STOP button is in the ON position. Under certain conditions, the system can remain active for approximately three minutes after the ignition has been switched off. The appropriate air bags deploy during sufficiently severe frontal or side impacts to help reduce the likelihood of serious injury to the occupants of the Kia Telluride.

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Camera cleaning system

If the rear camera lens becomes dirty, the image shown on the display may appear unclear or blurred. Use the washer system to help clean the camera and restore better rear visibility. To spray washer fluid onto the rear camera, push the wiper lever toward the instrument cluster.