Kia Telluride owner’s manuals & service informationIndependent reference library

Kia Telluride: Highway Driving Assist operation / Highway Lane Change Assist (if equipped)

Display and control

The status of the Highway Lane Change Assist system in your Kia Telluride is conveniently monitored directly through the instrument cluster. For a deeper understanding of these visual cues and how to navigate the settings, please refer to the comprehensive LCD display modes section in your owner's manual.

The Kia Telluride provides clear, real-time feedback regarding the Highway Lane Change Assist status on the instrument cluster as follows:

Figure 1. Ready/Operating
Kia Telluride instrument cluster showing Highway Lane Change Assist in Ready or Operating status
Figure 2. Standby/Canceled
Kia Telluride instrument cluster displaying Highway Lane Change Assist in Standby or Canceled mode
  1. Highway Lane Change Assist indicator

    • Green (Green indicator icon for Kia Telluride Highway Lane Change Assist Ready status): Ready to assist.

    • Green (Blinking green indicator icon for Kia Telluride Highway Lane Change Assist active operation) blinking: System is actively maneuvering the vehicle.

    • Gray (Gray indicator icon for Kia Telluride Highway Lane Change Assist Standby status): Standby (function is enabled but conditions are not currently met).

    • White (White blinking indicator icon for Kia Telluride Highway Lane Change Assist cancellation) blinking: Canceled (this visual alert persists briefly following a system cancellation).

  2. Lane line

    The visual representation of the lane lines on your Kia Telluride display will match the color-coding of the Highway Lane Change Assist indicator (1). Notably, when the system is in Standby mode, the display will still indicate whether lane detection is currently available.

  3. Green arrow and shade

    A green arrow and accompanying highlight appear once the system has initiated the maneuver, remaining active until the lane change is successfully completed by your Kia Telluride.

  4. Message

    • An informative message will appear on the cluster if Highway Lane Change Assist is unable to engage after you have activated the turn signal lever.

    • An alert message will be displayed if the system is forced to cancel while a lane change maneuver is currently in progress.

To turn the Highway Lane Change Assist ON, you can easily access the system settings via the Driving Assist or Lane Driving Assist button located on your steering wheel or dashboard console.

Turning ON Highway Lane Change Assist

Kia Telluride driver interface for enabling Lane Change Assist features
  1. Press the OK button on your steering wheel controls to enable or confirm the Lane Change Assist setting.

The Highway Lane Change Assist feature in your Kia Telluride is fully prepared to operate when the system is set to ON and the following comprehensive criteria are met:

TIP

  • When the Lane Change Assist function is ON, the Lane Following Assist feature will remain active even if you use the turn signal or hazard lights.

  • Lane Change Assist will automatically deactivate if you enter any of the following conditions:

    • You are driving on a road with only one driving lane.

    • The road lacks physical center separation structures, such as median strips or guardrails.

    • The vehicle sensors detect a pedestrian or cyclist in the path ahead.

  • If your speed drops below 15 mph (25 km/h) while the system is in the "Ready" state, the function will automatically shift into standby mode.

  • While driving between 20-40 mph (30-60 km/h), if the Kia Telluride fails to detect vehicles in the adjacent lanes, the system will switch to standby.

  • The status will immediately revert to standby if the sensors identify a potential risk of collision.

  • Please note that visual styles, icons, or color palettes on the display may vary slightly depending on your specific instrument cluster configuration or selected digital theme.

WARNING

Whenever the Highway Lane Change Assist system turns OFF, Steering Assist functionality will also be temporarily suspended. You must remain vigilant and ready to take full manual control of the steering at all times.

Highway Lane Change Assist operation

Operational view of the Kia Telluride performing a lane change maneuver

The Highway Lane Change Assist function operates seamlessly when the system is in the "Ready" state, you engage the turn signal lever to position (1) or (2), and the following conditions are confirmed:

TIP

  • When you move the turn signal lever to position (1), the system initiates. If you return the lever to the neutral position before the vehicle crosses the lane line, the maneuver will cancel.

    The system will not cancel after you have crossed the lane line; instead, it will conclude the maneuver and automatically turn the turn signal OFF once the lane change is finished.

  • When the lever is held in position (2) for the required duration, the green arrow will appear on your display. The Kia Telluride will continue the maneuver even if you release the lever back to its neutral position.

  • During the lane change, the turn signal indicator will continue to blink automatically even if you do not hold the lever, and it will shut off once the Kia Telluride has successfully centered itself in the new lane.

Highway Lane Change Assist standby

Your Kia Telluride will place the Highway Lane Change Assist into a standby state if a "Ready" condition is not met or if you are navigating specific road environments, including:

Canceling Highway Lane Change Assist

The Highway Lane Change Assist will be canceled under the following conditions:

WARNING

  • Highway Lane Change Assist will be immediately canceled under any of the following circumstances:

    • You manually switch the Highway Driving Assist system OFF.

    • You turn OFF or pause the Lane Following Assist or Smart Cruise Control features.

    • The instrument cluster triggers a "hands-off" steering wheel warning message.

    • You engage the turn signal lever to the (1) position while in an active state.

    • You manually turn the vehicle's hazard lights ON.

    • A warning message from the Forward Collision-Avoidance Assist or Blind-Spot Collision-Avoidance Assist is displayed.

    • The vehicle sensors detect a potential collision risk in the adjacent lane, even in the absence of a formal Collision-Avoidance Assist warning.

    • The target lane path comes to an end.

    • The system is unable to detect or map the target lane.

    • A technical fault is detected in the vehicle's turn signal lighting.

    • The feature is disabled in the vehicle settings menu, you enter a one-way road, an intersection or crosswalk is detected, a pedestrian/cyclist is in the driving path, or you move onto a road lacking physical lane-dividing structures like guardrails or medians.

    • Driving speed falls below 15 mph (25 km/h) while the system is in the "Ready" state.

    • Driving between 20-40 mph (30-60 km/h) without the vehicle detecting other traffic in the adjacent lanes.

    • The sensors detect an imminent risk of collision.

  • Should you cancel the Highway Lane Change Assist while it is in the middle of a maneuver, the vehicle may automatically steer back toward the lane center or disengage steering assistance entirely depending on the current road conditions. Always maintain your focus on the road and stay prepared to intervene.

  • Note that Highway Lane Change Assist may not function with standard precision on roads frequented by pedestrians or cyclists, such as near intersections or marked crosswalks.

Highway Driving Assist

Display and control The operating status of Highway Driving Assist is shown in the Driving Assist view of the instrument cluster. For additional information about the display layout, refer to the LCD display modes section of your Kia Telluride owner's manual...

Highway Driving Assist malfunction and limitations

Highway Driving Assist malfunction Check Driver Assistance system If Highway Driving Assist does not function correctly, the Master warning light () illuminates on the instrument cluster, ac..

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: TPMS malfunction indicator

If an electronic or hardware fault develops within the monitoring network, the low tire pressure warning icon ( ) will flash continuously for approximately 1 minute before remaining steadily illuminated on the instrument display. If a tire pressure loss coincides with a system communication fault, the Kia Telluride TPMS architecture can simultaneously trigger both the general system malfunction warning and the specific low tire pressure position indicator lights.

Kia Telluride (LQ2, 2027-2026) Owner's Manual: USB charger

The USB charger in the Kia Telluride is intended for recharging small electronic devices, such as smartphones or tablet PCs, through a compatible USB cable. Figure 1. Instrument panel Figure 2.