Kia Telluride: Instrument cluster / Gauges
The gauges in your Kia Telluride provide real-time operating information, allowing you to monitor important vehicle systems and driving conditions at a glance.
Speedometer
|
|
The speedometer shows the current driving speed of your Kia Telluride. Depending on the selected display format, vehicle speed is indicated in either miles per hour (mph) or kilometers per hour (km/h), allowing you to accurately monitor your speed under all driving conditions.
Tachometer
|
|
|
The tachometer displays the approximate engine speed in revolutions per minute (rpm), helping you monitor engine operation during acceleration and normal driving.
Use the tachometer to select appropriate shift points and avoid operating the engine at excessively low or excessively high engine speeds, both of which can affect performance and efficiency.
NOTE
Avoid allowing the engine speed to enter the tachometer's RED ZONE. Continuous operation in this range may result in serious engine damage.
Engine coolant temperature gauge
|
|
|
This gauge displays the engine coolant temperature whenever the ENGINE START/STOP button is in the ON position, allowing you to monitor normal engine operating temperature.
NOTE
If the gauge moves beyond the normal operating range toward the H (Hot) mark, the engine may be overheating. Continuing to drive in this condition could result in engine damage.
If overheating occurs, stop the vehicle safely and follow the procedures described in the section titled If the engine overheats.
WARNING
Never remove the radiator cap while the engine is hot. The cooling system remains under pressure, and escaping hot coolant or steam can cause severe burns. Always allow the engine to cool completely before checking or adding coolant.
Fuel gauge
|
|
|
This gauge indicates the approximate amount of fuel remaining in the fuel tank, helping you determine when refueling is necessary.
TIP
-
Fuel tank specifications are listed in the Recommended lubricants and capacities section.
-
The low fuel warning light illuminates when the remaining fuel level becomes critically low.
-
While driving on steep grades or around sharp curves, the fuel gauge reading and low fuel warning light may fluctuate because fuel shifts inside the tank.
WARNING
Fuel gauge
Driving until the fuel supply is exhausted can place vehicle occupants at risk.
Refuel as soon as possible whenever the low fuel warning light illuminates or the gauge approaches the E (Empty) mark.
NOTE
Avoid operating the vehicle with an extremely low fuel level. Running completely out of fuel may cause engine misfires and could damage the catalytic converter.
Odometer
|
|
|
The odometer records the total distance traveled by your Kia Telluride throughout its lifetime. This value is useful for tracking scheduled maintenance intervals and overall vehicle usage.
-
Odometer range: 0–999,999 mi or 0–1,599,999 km.
Distance to empty
|
|
|
-
The Distance to Empty function estimates how far the vehicle can travel using the fuel currently remaining in the tank.
-
Distance range: 1–9,999 mi or 1–9,999 km.
-
-
If the estimated remaining range falls below 1 mile (1.6 km), the trip computer displays "---" instead of a numerical value.
-
You must add more than 1.6 gallons (6 liters) of fuel before the fuel gauge and estimated range are updated.
TIP
-
If the Kia Telluride is parked on an incline or the battery has recently been disconnected, the estimated distance to empty may not be completely accurate until normal driving resumes.
-
The displayed driving range is an estimate and may differ from the actual distance you can travel.
-
The trip computer may not recognize small refueling amounts of less than 1.6 gallons (6 liters).
-
Driving style, road conditions, weather, traffic, and overall vehicle condition can all influence fuel economy and the estimated remaining driving range.
Outside temperature gauge
|
|
|
This gauge displays the current outside ambient temperature in 1°F or 1°C increments, depending on the selected measurement units.
-
Temperature range: -40°F–140°F (-40°C–60°C)
To help minimize driver distraction, the displayed outside temperature may update gradually rather than changing immediately like a conventional thermometer.
You can switch the temperature display between Fahrenheit and Celsius through the LCD display User Settings menu.
For additional information, refer to the section covering LCD display modes.
Instrument cluster
Figure 1. Type A Figure 2. Type B The appearance of the instrument cluster may vary depending on your Kia Telluride model, trim level, or optional equipment...
Transmission shift indicator. Automatic transmission shift indicator
The transmission shift indicator provides a clear visual display of the currently selected gear, allowing the driver of the Kia Telluride to quickly confirm the transmission operating mode while driving or when the vehicle is stationary...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Idle Stop and Go (ISG)
The Idle Stop & Go (ISG) system in the Kia Telluride is designed to help reduce fuel consumption by automatically stopping the engine when the vehicle is stationary and restarting it when driving conditions require engine operation again. AUTO STOP When ISG is active and you press the brake pedal to bring the Kia Telluride to a complete stop, the engine may automatically shut off to reduce unnecessary idling.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: 12V parking lithium battery: (if equipped)
Certain configurations of the Kia Telluride feature a specialized auxiliary 12V parking lithium battery. This additional power unit delivers a constant and stable electrical supply to support background functions while parked, including Over-The-Air (OTA) system software updates, the automatic A/C drying feature, and CCS operations.