Kia Telluride: Child Restraint System (CRS) / Children always in the rear
Children younger than 13 years of age should always ride in the rear seats and be properly restrained. Keeping children in the rear seating area significantly reduces the risk of injury during a collision, emergency braking, or sudden evasive maneuver.
WARNING
Restraint Location
Never install an infant or child restraint in the front passenger seat. A deploying front air bag can strike a rear-facing or forward-facing child restraint with considerable force, resulting in severe or fatal injuries.
CAUTION
Hot Child Restraint System (CRS)
A Child Restraint System left inside a closed vehicle on a hot day may become extremely hot. Before placing a child in the CRS, always check the seat surface, harness straps, buckles, and latches to help prevent burns or discomfort.
Accident statistics consistently show that children are generally safer when properly restrained in the rear seats rather than in the front passenger seat. Even in vehicles equipped with advanced air bag systems, children can suffer serious injuries if they are not seated and restrained correctly. When children have outgrown a Child Restraint System, they should use the vehicle's seat belts as recommended.
Every U.S. state has laws regulating the transportation of children. The age, height, and weight requirements for transitioning from a Child Restraint System to a standard seat belt vary by jurisdiction. Always familiarize yourself with the regulations in your home state as well as any state where you will be traveling.
The Child Restraint System must be correctly positioned and securely installed in one of the rear seating locations. Always use a commercially available CRS that complies with the applicable Federal Motor Vehicle Safety Standards (FMVSS).
Most Child Restraint Systems are designed to be secured using either the vehicle's lap/shoulder seat belt or the LATCH anchorage system provided in the rear seats of the Kia Telluride. Always choose the installation method recommended by the child restraint manufacturer.
Child Restraint System (CRS)
Infants and younger children should always ride in a properly sized rear-facing or forward-facing Child Restraint System that has been securely installed in the rear seat. Carefully read and follow all installation, adjustment, and usage instructions supplied by the CRS manufacturer before transporting a child.
Child Restraint System (CRS) Installation
An incorrectly installed Child Restraint System may not adequately protect a child during an accident. Always observe the following precautions whenever installing or using a CRS in your Kia Telluride:
-
Always follow the installation and operating instructions provided by the Child Restraint System manufacturer.
-
Always secure your child correctly in the CRS before driving, and verify that all harnesses and buckles are properly fastened.
-
If the vehicle head restraint interferes with correct CRS installation, adjust or remove the head restraint only as described in the CRS manufacturer's instructions and reinstall it when the child restraint is no longer in use.
-
Do not use an infant carrier or child safety seat that hooks over the seatback, as this design may not provide adequate protection during a collision.
-
When installing a CRS in the center seating position, ensure that it does not press against or interfere with the adjacent seat belt buckles. Contact with the buckles may damage them or affect their operation. Periodically verify that the CRS has not shifted and continues to be installed securely without contacting any seat belt hardware.
WARNING
After any collision, have an authorized Kia dealer inspect the Child Restraint System anchorage points, seat belts, tether anchors, and lower LATCH anchors before continuing to use them. Damaged restraint components should be replaced immediately to ensure continued occupant protection.
Child Restraint System (CRS)
Infants and young children must always travel in a properly installed rear-facing or forward-facing Child Restraint System (CRS) that is securely attached to one of the rear seating positions...
Selecting a child restraint system (CRS)
When choosing a Child Restraint System (CRS) for your child, always consider the following recommendations to ensure the highest level of protection while traveling in your Kia Telluride...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: When flatbed is unavailable
A two-wheel drive (2WD) Kia Telluride may be towed with its non-driven wheels rolling on the roadway (without wheel dollies), provided the driven wheels are fully raised off the ground and the electronic parking brake is disengaged prior to switching off the vehicle.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: LCD Display Modes
The sophisticated Kia Telluride LCD cluster features three distinct modes, allowing you to prioritize the data most relevant to your driving style. Easily toggle between these views by pressing the Mode button. View Description Driving Assist view Provides real-time visual feedback from the advanced Driver Assistance Systems (ADAS) Navigation view Displays turn-by-turn navigation guidance directly in your line of sight Utility information view Centralizes essential driving data, vehicle health warnings, and trip statistics Driving Assist view This mode provides an at-a-glance status of your active safety features, ensuring you are aware of your vehicle's environment: Lane Keeping Assist (LKA) engagement status Smart Cruise Control (SCC) settings and lead vehicle distance Lane Following Assist (LFA) operational state For a comprehensive understanding of these safety technologies, please consult the dedicated Driver assistance section of your owner's manual.