Kia Telluride: Lighting / Battery saver function
This feature is designed to protect the vehicle battery from excessive discharge if the exterior lights are accidentally left on. Once the engine is turned off and the driver's door is opened, the system automatically switches off the position lamps.
However, if you operate the lighting switch after the vehicle has been turned off, the position lamps will remain illuminated even with the driver's door open.
If you intentionally want the lights to stay on after parking your Kia Telluride, switch the position lamps off and then back on again using the headlamp switch located on the steering column.
Lighting
The Kia Telluride is equipped with a comprehensive lighting system designed to improve visibility, enhance driver awareness, and provide safer operation in a wide range of driving conditions...
Headlight delay function
If the vehicle is switched to the OFF or ACC position while the headlamps are on, both the headlamps and position lamps will remain illuminated for approximately five minutes, helping light your path after leaving the vehicle...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Electronic Stability Control (ESC)
The Electronic Stability Control (ESC) system is designed to help maintain vehicle stability during cornering and sudden steering maneuvers, reducing the likelihood of losing control and helping the Kia Telluride remain on its intended path. When necessary, ESC selectively applies braking force to individual wheels and works together with the vehicle management system to improve stability and help the Kia Telluride maintain traction.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Securing a child restraint system (CRS) with the LATCH anchors system
To install a LATCH-compatible Child Restraint System in either rear outboard seating position of your Kia Telluride: Move the seat belt buckle away from the lower anchors to prevent accidental contact. This helps avoid damage to the buckle or seat belt webbing during installation.