Kia Telluride: Seat belts / Seat belt restraint system
For the highest level of protection, always wear your seat belt whenever the Kia Telluride is in motion. Proper seat belt use significantly reduces the risk of injury during sudden braking, sharp maneuvers, or a collision.
-
Position the shoulder belt so it rests midway across your shoulder and lies comfortably over your collarbone. It should never touch your neck or slip off your shoulder.
-
Children should never ride in the front passenger seat unless permitted by applicable child restraint recommendations. Refer to the Child Restraint System (CRS) section for additional information.
WARNING
Twisted seat belt
Always make sure the seat belt webbing is flat and free of twists before fastening it. A twisted seat belt cannot distribute crash forces properly and may increase the risk of serious injury by concentrating force on a small area of the body.
WARNING
Shoulder belt
-
Never place the shoulder belt under your arm or behind your back. An incorrectly positioned shoulder belt cannot provide proper protection during a collision.
-
Always wear both the lap and shoulder portions of the seat belt together. Using only part of the restraint system greatly reduces its effectiveness.
WARNING
Damaged seat belt
Damage to the seat belt webbing, buckle, retractor, or any other component may prevent the restraint system from operating correctly. If any part of the seat belt assembly becomes damaged or has been subjected to crash forces, the complete assembly should be replaced, even if no visible damage is apparent.
Seat belts are engineered to transfer impact forces to the stronger skeletal areas of the body. For maximum effectiveness, wear the lap belt low and snug across the hips while positioning the shoulder belt across the center of the chest and over the shoulder. Avoid placing the lap belt across the abdomen.
Adjust the seat belt so it fits securely while remaining comfortable. A properly fitted belt provides significantly better protection than one that is loose.
Excessive slack in the seat belt can greatly reduce its ability to protect the occupant during an accident.
Keep the seat belt webbing clean and free from contaminants such as oils, grease, polishing compounds, chemicals, and especially battery acid. Clean the webbing only with mild soap and water. If the webbing becomes frayed, heavily contaminated, cut, or otherwise damaged, replace the entire seat belt assembly.
-
Do not modify, alter, or install accessories that could interfere with the operation of the seat belt adjustment or retractor mechanisms, or prevent the belt from removing slack properly.
-
When fastening a seat belt, ensure it is inserted into the correct buckle. Accidentally latching it into another seat's buckle may prevent the restraint system from providing proper protection.
-
Never fasten or unfasten your seat belt while driving. Removing your restraint while the vehicle is moving can result in loss of protection and increase the likelihood of serious injury or death in the event of an accident.
-
Before buckling the seat belt, make sure it passes only over clothing and is not routed over hard or bulky objects carried on your body.
WARNING
Seat belt buckle
Keep the seat belt buckle and buckle receptacle free of foreign materials such as coins, food crumbs, gum, dirt, or liquids. Obstructions may prevent the buckle from latching securely, reducing the effectiveness of the seat belt system and increasing the risk of serious injury or death during a collision.
- Seat belt warning
- Seat belt - Driver's 3-point system with emergency locking retractor
- Pretensioner seat belt
Seat belts
Seat belts are designed to rest against the stronger skeletal areas of the body. The lap portion should be worn low and snug across the hips, while the shoulder portion should pass over the shoulder and across the chest for proper protection...
Seat belt warning
The Kia Telluride seat belt warning system combines visual indicators and audible alerts to remind occupants to fasten their seat belts before and during driving...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Windows
The Kia Telluride is equipped with power windows that are operated using dedicated switches on the doors. Power window lock switch Rear door (left) power window switch Rear door (right) power window switch Driver’s door power window switch Front passenger’s door power window switch TIP In cold or wet weather, freezing conditions may prevent the power windows from operating smoothly until the affected components thaw.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Climate control air filter. Inspecting the climate control air filter
Inspecting the climate control air filter Replace the climate control air filter according to the factory maintenance schedule to maintain proper cabin ventilation and air quality. If you frequently drive your vehicle through heavily air-polluted areas, industrial zones, or unpaved dusty roads for extended periods, have the filter inspected more often and replaced earlier than normal.