Kia Telluride: Safe Exit Assist (SEA) / Safe Exit Assist settings
Safe Exit
|
|
While the Kia Telluride is ON, open Setup > Vehicle > Driver Assistance > Driving Safety > Safe Exit on the infotainment display to enable or adjust the Safe Exit Assist feature.
WARNING
Always check the surrounding traffic before opening any door. If Safe Exit is turned off, Safe Exit Assist cannot provide warnings or protective assistance.
CAUTION
-
Do not rely on the system while towing a trailer or another vehicle, or when using a cargo carrier or equipment that may interfere with sensor operation or alter vehicle balance. Under these conditions, Safe Exit Assist may not function as intended.
-
When a trailer or carrier is connected, configure the trailer/carrier menu if your Kia Telluride is equipped with this feature. If the connection is detected automatically using genuine Kia components or selected manually by the driver, certain driver assistance functions may operate with limitations. Refer to the Driver Assistance System limitations section and always drive carefully.
NOTE
Safe Exit Assist remembers its previous setting, so the function remains enabled or disabled after the vehicle is restarted.
Warning Methods
|
|
|
To customize the Warning Methods while the vehicle is ON, select Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment screen. The following options are available:
-
Warning Volume: Adjusts the loudness of the audible warning tones.
-
Driving Safety Priority: Automatically lowers the volume of other audio sources whenever a driving safety warning is issued.
TIP
-
Your selected Warning Methods may also be shared with other compatible Kia Telluride driver assistance systems.
-
The chosen Warning Methods settings are retained even after the vehicle is turned OFF and started again.
-
Depending on your Kia Telluride model, trim level, or equipment, some Warning Methods menu items may not be available.
Safe Exit Assist (SEA)
When the Kia Telluride is stationary, Safe Exit Assist helps reduce the risk of opening a door into the path of an approaching vehicle...
Safe Exit Assist operation. Warning and control
Warning and control Safe Exit Assist on the Kia Telluride provides the following functions to help protect occupants when exiting the vehicle: Vehicle Detection Collision Warning (when exiting the vehicle) Safe Exit Assist linked to Electronic child safety lock V..
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Trailer Stability Assist (TSA)
Trailer Stability Assist (TSA) functions as an extension of the vehicle's stability control system to help the Kia Telluride maintain stability while towing. If trailer sway or oscillation is detected, TSA automatically intervenes to reduce instability and improve directional control.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Wiper blades
Blade inspection Buildup of road film, dead insects, tree sap, or leftover car wash wax treatments on either the windshield surface or rubber wiper blades can compromise clearing efficiency and cause annoying streaking. If the wipers fail to wipe smoothly across the glass, clean both the glass panel and the flexible blade elements thoroughly using a quality automotive glass cleaner or mild soap solution, then rinse completely with clean water.