Kia Telluride: Reverse Parking Collision-avoidance Assist (PCA): (if equipped) / Reverse Parking Collision-avoidance Assist settings
Parking Safety
|
|
While the ignition system or power button is ON, navigate to Setup > Vehicle > Driver Assistance > Parking Safety directly on the main infotainment system touchscreen of your Kia Telluride.
Backward Safety: This specific function delivers intuitive visual/audible driver alerts and active braking assistance whenever the system calculates an imminent risk of collision with pedestrians or obstacles located directly behind your vehicle.
WARNING
-
Do not rely on or use the system when towing a trailer, hauling another vehicle, or when a hitch-mounted bike rack, cargo carrier, or non-standard equipment is installed that interferes with rear sensor operation or vehicle balance. Under these conditions, the system may not operate normally or may trigger unintended emergency braking.
-
When connecting a trailer or exterior carrier, configure the trailer setup menu on your infotainment screen (if equipped). If the driver manually adjusts this setting or if a trailer connection is automatically recognized through approved genuine Kia parts, driver assistance system functions may be limited or temporarily disabled. Please review all Driver assistance system limitations thoroughly and always drive with caution.
TIP
When you restart your Kia Telluride, the Backward Safety preference remains selected and your previously customized Parking Collision-Avoidance Assist settings are retained automatically.
Warning Methods
|
|
|
To configure your personalized alert preferences while the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Warning Methods on the central infotainment system screen. You can adjust the following parameters:
-
Warning Volume: Adjusts the output loudness level of system chime notifications and acoustic warnings inside the cabin.
-
Haptic Warning: Enables or turns ON tactical steering wheel vibration alerts to physically inform the driver of detected hazards.
TIP
-
Your customized Warning Methods settings on your Kia Telluride may simultaneously apply to the warning alerts of other integrated driver assistance systems.
-
All Warning Methods preferences automatically maintain their last configured settings when you turn OFF and restart the vehicle engine or power system.
-
The specific Warning Methods configuration menu may vary slightly or may not be available on all Kia Telluride trim levels and market packages.
Reverse Parking Collision-avoidance Assist (PCA): (if equipped)
The Reverse Parking Collision-avoidance Assist system in your Kia Telluride actively monitors the area behind your SUV to detect pedestrians or stationary physical obstacles...
Reverse Parking Collision-avoidance Assist operation
Turning ON or OFF Press and hold the dedicated Parking Sa..
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Recap of important safety precautions
Never allow anyone to ride in the cargo area or on a folded rear seat. Every occupant should remain seated upright with their back against the seatback, seat belt securely fastened, and both feet resting on the floor while the Kia Telluride is moving.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Rear windshield wiper and washer operation
The rear windshield wiper and washer switch is positioned at the end of the wiper control lever for convenient operation. Turn the switch to the desired setting to operate the rear wiper and washer. HI: Normal rear wiper operation LO: Intermittent rear wiper operation OFF: Rear wiper off Push the lever away from you to spray washer fluid onto the rear glass and operate the rear wiper several times.