Kia Telluride: Rear Cross-traffic Collision-avoidance Assist (RCCA) / Rear Cross-Traffic Collision-avoidance Assist settings
Rear Cross-Traffic Safety
|
|
While the vehicle is ON, select Setup > Vehicle > Driver Assistance > Parking Safety > Rear Cross-Traffic Safety on the infotainment screen to adjust Rear Cross-Traffic Collision-avoidance Assist settings.
WARNING
Rear Cross-Traffic Collision-avoidance Assist automatically turns ON whenever the vehicle is restarted. If Rear Cross-Traffic Safety is deselected after restarting the Kia Telluride, always check the surroundings carefully and reverse with extra caution.
WARNING
-
Do not use this system when towing a trailer or another vehicle, or when a carrier or other equipment is installed in a way that may affect sensor operation or vehicle balance. Under these conditions, Rear Cross-Traffic Collision-avoidance Assist may not operate properly.
-
When connecting a trailer or carrier, configure the trailer or carrier menu if equipped. If the setting is selected manually or the connection is automatically recognized through genuine parts, some driver assistance functions may be limited. Refer to Driver assistance system limitations and always drive carefully.
Warning Methods
|
|
|
To adjust Warning Methods while the vehicle is ON, select Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment screen. The following settings can be changed:
-
Warning Volume: Adjusts the loudness of the warning sound used by driver assistance alerts.
-
Haptic Warning: Turns the steering wheel vibration warning ON for supported safety alerts.
TIP
-
Your selected Warning Methods settings may also be used by other driver assistance systems in the Kia Telluride.
-
Warning Methods keep the most recent settings after the vehicle is turned OFF and restarted.
-
The Warning Methods menu may not be available on every vehicle, depending on trim level, equipment, or market specification.
Rear Cross-traffic Collision-avoidance Assist (RCCA)
Rear Cross-traffic Collision-avoidance Assist is designed to help detect vehicles approaching from the left or right behind the Kia Telluride while reversing...
Rear Cross-Traffic Collision-avoidance Assist operation
Rear Cross-Traffic Collision-avoidance Assist warns the driver and may help control the vehicle according to the level of collision risk detected while the Kia Telluride is reversing...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Ground View Monitor (GVM): (if equipped)
The Ground View Monitor (GVM) gives the driver a detailed view of the area directly beneath and in front of the Kia Telluride, helping identify obstacles that may not be visible from the driver's seat. This feature enhances confidence during low-speed maneuvering, off-road driving, and parking in confined spaces.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: AWD precautions
Tires Always give special attention to the tires on your Kia Telluride, especially if it is equipped with an AWD system. Because the AWD system continuously distributes power to all four wheels, tire condition plays a critical role in maintaining predictable handling, stability, and overall driving performance.