Kia Telluride owner’s manuals & service informationIndependent reference library

Kia Telluride: Tire Pressure Monitoring System (TPMS) / Low tire pressure indicator light

When the TPMS warning indicators illuminate on the dashboard of your Kia Telluride, it signals that one or more of your tires have experienced a significant drop in air pressure and are dangerously under-inflated.

Kia Telluride digital instrument display showing individual low tire pressure location and warning alert
  1. Low tire pressure warning notification and individual tire position alert

If the low pressure indicator light turns on while driving, ease off the accelerator immediately, avoid sharp or aggressive steering maneuvers, and prepare for extended braking distances. Safely pull over to a secure roadside location and inspect all four tires as soon as possible.

Re-inflate the affected tire or tires to the recommended cold inflation pressure specified on the vehicle placard located on the outer panel of the driver's side center pillar (B-pillar). If you cannot safely reach a service station or if the damaged tire fails to hold air pressure after inflation, carefully replace the under-inflated wheel with the spare tire stored on your Kia Telluride.

The TPMS malfunction and low tire pressure warning light may remain illuminated for a short period after restarting the vehicle. Typically, it requires up to 20 minutes of continuous driving above minimum speed thresholds for the sensor system to re-evaluate pressure levels, clear the alert, and complete its diagnostic cycle after the tire has been properly serviced or inflated.

During cold weather or winter transitions, the low tire pressure light may trigger unexpectedly if you last calibrated your tires during warm ambient conditions. This behavior is normal and does not indicate a system fault; ambient temperature drops cause air within the tire casing to contract, leading to a proportional decline in measured internal pressure.

Regularly inspect tire pressures and adjust them to match recommended specification values under the following driving conditions:

Adding air to an under-inflated tire may not immediately extinguish the instrument cluster warning light if the gauge or inflator tool used has a marginal calibration tolerance. To ensure the Kia Telluride TPMS resets properly and turns off the warning light, inflate the tire slightly above the recommended baseline specification before verifying cold pressures.

WARNING

Low pressure damage

Never continue driving your Kia Telluride on severely under-inflated or flat tires. Operating under low pressure generates intense internal heat buildup, causing rapid sidewall degradation and structural failure that drastically impairs vehicle handling stability, lengthens stopping distances, and increases the risk of losing vehicle control.

Effective use of TPMS

Every tire installed on your Kia Telluride, including the compact spare tire (if equipped), should be thoroughly checked monthly when cold and adjusted to the exact inflation pressure specified on the driver's side B-pillar tire information placard...

TPMS malfunction indicator

If an electronic or hardware fault develops within the monitoring network, the low tire pressure warning icon ( ) will flash continuously for approximately 1 minute before remaining steadily illuminated on the instrument display...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Engine coolant

The pressurized cooling system in your Kia Telluride features a heavy-duty translucent reservoir filled from the factory with premium year-round antifreeze coolant. This system is designed to maintain optimal engine operating temperatures while preventing internal corrosion and freezing.

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Fuses

Left side: Normal Right side: Blown Figure 1. Blade type Figure 2.