Kia Telluride: Tire Pressure Monitoring System (TPMS) / Effective use of TPMS

Every tire installed on your Kia Telluride, including the compact spare tire (if equipped), should be thoroughly checked monthly when cold and adjusted to the exact inflation pressure specified on the driver's side B-pillar tire information placard.

(If your vehicle is fitted with aftermarket or non-standard tire sizes different from those listed on the tire information placard, you should consult a tire specialist to establish the correct cold inflation pressure for those specific tire dimensions.)

As a vital safety feature, your Kia Telluride features an advanced Tire Pressure Monitoring System (TPMS) that illuminates a dedicated low pressure telltale icon whenever one or more tires experience significant under-inflation. Consequently, when this warning light illuminates, pull off the road safely, check all four tires, and inflate them to recommended cold pressures. Operating on under-inflated tires generates extreme heat buildup, dramatically accelerates tread wear, reduces fuel efficiency, compromises braking performance, and can lead to sudden tread separation or catastrophic tire failure.

Please note that the TPMS is designed as an emergency warning tool rather than a replacement for routine maintenance; drivers remain responsible for regularly verifying correct tire pressures even if under-inflation has not crossed the threshold required to trigger the cluster warning light.

Your Kia Telluride is also equipped with an integrated TPMS self-diagnostic malfunction indicator to alert you whenever system components fail or signals are disrupted. This diagnostic indicator shares the same instrument cluster light as the low tire pressure telltale. When a system fault is detected, the light flashes for approximately one minute before staying continuously illuminated.

This warning sequence repeats upon every engine start until the underlying electronic fault is resolved. When the malfunction light remains active, the system cannot monitor or warn you of low pressure conditions. Malfunctions can occur for various reasons, including installing incompatible wheel sensors or aftermarket wheels that block wireless transmission to the vehicle receiver.

Always observe the instrument cluster after replacing tires or swapping wheel sets on your Kia Telluride to confirm that replacement components communicate properly with the factory TPMS system.

WARNING

NOTE