Kia Telluride owner’s manuals & service informationIndependent reference library

Kia Telluride: Automatic Transmission (AT) / To stay in N (Neutral) when engine is OFF

If you need the Kia Telluride to remain in N (Neutral) after switching the engine off while the ignition is in the ACC position, follow the procedure below:

Kia Telluride Neutral mode confirmation message on instrument cluster
Kia Telluride steering wheel OK button for Neutral mode selection
  1. Turn AUTO HOLD off and release the parking brake while the vehicle is in the ON position.

  2. Firmly depress the brake pedal.

  3. Select N (Neutral).

  4. Release the brake pedal. A confirmation message will appear on the instrument cluster.

  5. Press and hold the OK button on the steering wheel for more than one second.

    If the Electronic Parking Brake (EPB) is applied, release it manually while keeping the brake pedal depressed.

    On vehicles equipped with EPB, the parking brake is not released automatically when shifting into N (Neutral).

  6. After the message appears on the instrument cluster, press the ENGINE START/STOP button. The Kia Telluride will remain in N (Neutral) after the engine has been switched off.

TIP

If the driver's door is opened within 30 minutes while the vehicle remains in the ACC position, the Kia Telluride automatically shifts into P (Park) and changes to the OFF position.

NOTE

Do not open the driver's door while the vehicle is passing through an automatic car wash tunnel. Failure to follow this instruction may damage the vehicle or the car wash equipment.

If the driver's door is opened within 30 minutes after selecting N (Neutral), the transmission automatically shifts into P (Park).

On vehicles equipped with the Electronic Parking Brake (EPB), the parking brake is applied automatically.

NOTE

When the Kia Telluride remains in N (Neutral), the ignition stays in the ACC position. In this mode, the doors cannot be locked, and leaving the vehicle in ACC for an extended period may discharge the 12V battery.

Transmission ranges

When the Kia Telluride is in the ON position, the selected transmission range is displayed on the instrument cluster, allowing you to easily confirm the current gear selection...

Shift lock system

For added safety, the Kia Telluride is equipped with a shift lock system that prevents the transmission from being shifted out of P (Park) into R (Reverse) unless the brake pedal is firmly depressed...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Safe Exit Assist operation. Warning and control

Warning and control Safe Exit Assist on the Kia Telluride provides the following functions to help protect occupants when exiting the vehicle: Vehicle Detection Collision Warning (when exiting the vehicle) Safe Exit Assist linked to Electronic child safety lock Vehicle Detection The system monitors approaching traffic from the rear and, when the following conditions are met, illuminates the warning indicators in the outside rearview mirrors, the second-row door indicator, and the Head-Up Display (if equipped): Vehicle speed: 2 mph (3 km/h) or below.

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Declaration of conformity

FCC This equipment has been tested and found to comply with the limits for a Class B digital device under Part 15 of the FCC Rules. These requirements are intended to provide reasonable protection against harmful interference in residential environments.