Kia Telluride: Smart Cruise Control (SCC) / Smart Cruise Control settings
Smart Cruise Control
While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control on the infotainment system screen to set the preferred distance, acceleration, and reaction speed settings.
Based on driving style
|
|
While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control > Based on Driving Style. When Based on Driving Style is selected on the infotainment system screen, Smart Cruise Control operates by reflecting the way you drive, including following distance, acceleration, and reaction speed.
You can also adjust the driving style manually to better match your preferred Smart Cruise Control behavior.
TIP
-
If the Kia Telluride is equipped with Based on Driving Style, you can choose between Based on driving mode and Based on driving style by tapping Setup > Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control on the infotainment system screen.
-
While Smart Cruise Control is operating with Based on driving style selected, pressing and holding the Vehicle Distance (
) button disables Based on driving mode. Press and hold the Vehicle Distance (
) button to change Smart Cruise Control to Based on driving style mode. -
Smart Cruise Control learns your driving style only while you are driving the vehicle.
-
When Based On Driving Style is disabled, the learned driving style values, including distance between vehicles, acceleration, and response speed, remain at the same level as the Based On Driving Style function.
-
Whether Based On Driving Style is enabled or disabled, the displayed driving style values, including vehicle distance, acceleration, and response speed, may vary depending on different driving styles.
WARNING
-
Towing a trailer or installing a carrier may reduce control stability. Disable the function if necessary, and always drive the Kia Telluride with extra caution when towing or carrying additional equipment.
-
Do not use the system when towing another vehicle or when equipment that may affect sensor operation or vehicle balance is installed, because Smart Cruise Control may not operate properly.
Warning Methods
|
|
|
To change the Warning Methods settings while the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment system screen. The following settings can be adjusted:
-
Warning Volume: Adjusts the volume level of the warning sound.
-
Haptic Warning: Turns the steering wheel vibration warning ON.
-
Driving Safety Priority: Lowers the volume of other audio sources when the Driving Safety system produces a warning.
TIP
-
Your Warning Methods settings may also apply to the warning methods used by other driver assistance systems.
-
Warning Methods keep their most recent settings when you turn the vehicle OFF and restart it.
-
The Warning Methods setting menu may not be available on every vehicle.
Smart Cruise Control (SCC)
Basic function Smart Cruise Control can detect a vehicle traveling ahead of the Kia Telluride and help maintain an appropriate following distance while keeping the vehicle near the speed set by the driver...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Dual wide sunroof: (if equipped)
If your Kia Telluride is equipped with a dual wide sunroof, you can conveniently slide or tilt the front glass panel using the sunroof switch located on the overhead console. The system is designed to provide additional ventilation, natural light, and a more open cabin atmosphere while maintaining easy operation.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Rear Cross-traffic Collision-avoidance Assist (RCCA)
Rear Cross-traffic Collision-avoidance Assist is designed to help detect vehicles approaching from the left or right behind the Kia Telluride while reversing. When a possible collision risk is detected, the system can warn the driver with a message and audible alert, and it may also assist with braking to help reduce the chance of a collision.