Kia Telluride: Trailer towing: (if equipped) / Safety chains
Always connect safety chains between your Kia Telluride and the trailer before towing. Cross the chains beneath the trailer tongue so they can help support the tongue if it becomes disconnected from the hitch.
Follow the recommendations supplied by the trailer or hitch manufacturer when attaching the safety chains. Leave only enough slack to allow normal turning without placing excessive tension on the chains. Never allow the chains to drag on the road surface while driving.
Trailer Control Module (TCM)
The Trailer Control Module (TCM) connector can be accessed and installed by opening the rear bumper cover...
Trailer brakes
If your trailer is equipped with its own braking system, verify that it complies with all applicable state or local regulations and that it has been installed correctly and is operating properly before towing...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Air bag warning and indicator. Air bag warning light
Air bag warning light The air bag warning light on the instrument panel is designed to notify you if the Supplemental Restraint System (SRS), including the side and curtain air bags used for rollover protection, requires inspection or service. If the air bag warning light remains illuminated for longer than approximately 6 seconds after the ENGINE START/STOP button is switched to the ON position, or if it comes on while driving your Kia Telluride, one or more SRS components may not be operating correctly.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Smart Cruise Control display and control
You can effortlessly monitor the operational status of the Smart Cruise Control (SCC) system by accessing the "Driving Assist" view located within your Kia Telluride instrument cluster. For a comprehensive overview of how to customize these views, please refer to the detailed LCD display mode settings in your owner’s manual.