Kia Telluride: Light bulbs / Replacing lights (LED type)
If any LED light cluster on your Kia Telluride fails to operate correctly, please schedule a comprehensive electrical system inspection with an authorized Kia dealer. Because light-emitting diodes and their micro-circuitry are permanently integrated directly into the assembly housing as a single solid-state unit, individual diodes cannot be serviced separately. Consequently, the entire assembly must be replaced to restore proper illumination.
Always entrust checking, testing, or servicing of these integrated LED components to a trained automotive technician, as improper probing or incorrect installation procedures can easily trigger electrical faults, blow system fuses, or cause permanent damage to surrounding vehicle body wiring harnesses.
NOTE
If the high-mounted center stop lamp (LED) on your Kia Telluride stops working, please have your vehicle inspected by an authorized Kia dealer as soon as possible. Because this safety assembly is manufactured as a sealed, integrated electronic component, individual internal diodes cannot be replaced as a single standalone service part; instead, the entire high-mounted lamp unit must be renewed. It is essential to have a certified automotive technician check or repair the high-mounted stop lamp system to prevent electrical feedback loops, circuit overloads, or any structural damage to neighboring vehicle trim and interior headliner parts.
Replacing front lights (LED type)
If any front illumination cluster on your Kia Telluride experiences a failure or stops functioning properly, please have your vehicle inspected and serviced by an authorized Kia dealer.
|
|
-
Headlamp (Low) (LED type)
-
Headlamp (Low/High) (LED type)
-
Day time running light/Position lamp/Front turn signal lamp (LED type)
-
Front side marker lamp (LED type)
-
Front fog lamp (LED type)*
Replacing side repeater lamp (LED type)
If the side mirror repeater lamp on your Kia Telluride fails to operate, please have your vehicle inspected and serviced by an authorized Kia dealer.
|
|
Replacing rear lights (LED type)
If any rear lighting element on your Kia Telluride stops working correctly, please have your vehicle inspected by an authorized Kia dealer.
|
|
|
-
High mounted stop lamp (LED type)
-
Tail lamp/Stop lamp/Rear turn signal lamp (LED type)
-
Tail lamp/Stop lamp/Rear turn signal lamp (LED type)
-
Reversing lamp (LED type)
-
Rear side marker lamp (LED type)
-
License plate lamp (LED type)
Replacing interior lights (LED type)
If any interior cabin lighting fixture in your Kia Telluride fails to illuminate properly, please have your vehicle inspected by an authorized Kia dealer.
|
|
|
|
|
|
|
|
|
|
|
|
Light bulb position (Rear)
Figure 1...
Appearance care
Rely on the comprehensive guidance, expert cleaning techniques, and protective maintenance schedules outlined in the following sections to preserve the pristine showroom condition of both the exterior paintwork and interior upholstery of your Kia Telluride...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Digital key 2 (card key)
How to register Digital Key 2 (card key) To use a card key as a Digital Key 2 for your Kia Telluride, the card must first be registered in the vehicle system by following the procedure below: Enter the vehicle with 2 smart keys. 1) Wireless charging pad Check whether the Use menu is activated.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Limitations of the system
Digital Key 2 may not operate correctly under any of the following conditions: The smartphone battery or the Kia Telluride vehicle battery is discharged. NFC or Bluetooth has been turned off in the smartphone settings.