Kia Telluride owner’s manuals & service informationIndependent reference library

Kia Telluride: What to do in an emergency / In case of an emergency while driving

In the event of an unexpected roadside emergency, maintain your composure, keep a firm grip on the steering wheel, and strictly carry out these recommended procedures:

If the vehicle stalls while driving

  1. Smoothly ease off the accelerator pedal and allow speed to decay gradually while holding a straight path in your lane.

  2. Carefully guide your vehicle across traffic lanes toward a safe, wide pull-off area or shoulder away from passing vehicles.

  3. Depress the hazard switch button on the center console to turn on your hazard warning flashers and warn surrounding drivers.

  4. Attempt to restart the engine after shifting into Park (P). If your Kia Telluride refuses to start or stay running, contact an authorized Kia dealer or emergency roadside assistance.

If the vehicle stalls at a crossroad or junction

  1. Shift the transmission selector into N (Neutral) to unlock the driveline.

  2. If safe traffic conditions permit, manually roll or push the vehicle clear of the intersection to a secure roadside location to avoid oncoming traffic collisions.

If you have a flat tire while driving

  1. Gently lift your foot off the accelerator and allow vehicle momentum to dissipate gradually while steering straight ahead in a controlled manner.

    Avoid slamming on the brakes or making sudden aggressive steering maneuvers to pull over immediately, as abrupt weight transfer on a flat tire can cause severe directional instability or loss of vehicle control.

  2. Once vehicle speed has dropped to a manageable, safe rate, apply gentle brake pressure and steer towards the outer edge of the roadway.

  3. Pull as far off the active travel lanes as possible, bringing your vehicle to a complete stop on firm, level ground suitable for safe jack placement.

    When driving on a divided highway or freeway, avoid stopping in the narrow left median strip between opposing traffic flows unless forced to do so by immediate necessity.

  4. Once fully stopped, switch your hazard warning lights ON, firmly set the parking brake, and select P (Park) on the gear shifter.

  5. Direct all occupants to exit the cabin immediately, ensuring everyone exits strictly from the side of the vehicle facing away from active road traffic.

  6. When preparing to remove and replace the damaged wheel, strictly observe the flat tire changing instructions detailed later in this owner manual section.

If the engine overheats

If the engine temperature gauge on your Kia Telluride instrument cluster spikes into the hot zone, or if you notice a sudden loss of acceleration power, or hear loud metallic pinging or knocking sounds from under the hood, the engine is likely suffering from an extreme overheating condition...

Tire Pressure Monitoring System (TPMS)

The Tire Pressure Monitoring System (TPMS) actively measures real-time air pressure across all installed road wheels and presents key pressure telemetry directly on the Kia Telluride digital instrument cluster display...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: AUTO control: (if equipped)

Wiper speed control switch The rain sensor, positioned near the upper portion of the windshield, continuously detects the amount of rainfall and automatically adjusts the wiping interval.

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Reverse Parking Collision-avoidance Assist operation

Turning ON or OFF Press and hold the dedicated Parking Safety control button () for more than 2 seconds to manually switch the Reverse Parking Collision-Avoidance Assist system ON or OFF.