Kia Telluride: Seats / Front seat adjustment for manual seat : (if equipped)
The manually adjustable front seats in your Kia Telluride can be positioned using the control levers located on the outside of the seat cushion. Always adjust the seating position before driving to ensure maximum comfort, proper visibility, and safe vehicle control.
Moving forward and backward
Before driving, position the seat correctly and verify that it is securely locked. After making an adjustment, attempt to move the seat forward and backward without operating the adjustment lever. If movement occurs, the seat has not been fully locked and must be adjusted again.
|
To move the seat forward or backward:
- Pull the seat slide adjustment lever upward and keep it in the raised position.
- Slide the seat smoothly forward or backward until it reaches the desired driving position.
- Release the adjustment lever, then verify that the seat has locked securely into place before operating the vehicle.
Reclining seatback
|
To recline the seatback:
- Lean your upper body slightly forward and lift the seatback recliner lever.
- Carefully lean back while adjusting the seatback until the preferred seating angle is reached.
- Release the lever and confirm that the seatback has locked securely in the selected position.
The recliner lever MUST fully return to its original position to ensure the seatback is properly locked.
WARNING
Reclining seatback
Driving or riding with the seatback excessively reclined can significantly increase the risk of injury during a collision. Even if the seat belt is fastened, an improper seating position reduces the effectiveness of both the seat belts and the air bag system.
For the restraint system to provide maximum protection, the lap belt should fit securely across the hips and the shoulder belt should rest firmly against the chest. When the seatback is reclined too far, the shoulder belt may no longer remain properly positioned. During a collision, this may allow the occupant to slide beneath the lap belt or be thrown against the restraint system, increasing the likelihood of neck, abdominal, spinal, or other serious injuries.
The farther the seatback is reclined, the greater the possibility that your hips may slide beneath the lap belt or that your neck could come into contact with the shoulder belt during a crash.
Changing seat cushion height
|
To adjust the height of the seat cushion:
- Push the adjustment lever downward several times to lower the seat cushion.
- Pull the adjustment lever upward several times to raise the seat cushion until the desired seating height is achieved.
Seat leather: (if equipped)
The seats in your Kia Telluride are upholstered with premium artificial leather. Depending on surrounding temperature and humidity, the surface may naturally develop slight wrinkles or changes in appearance...
Front seat adjustment for power seat : (if equipped)
The available power front seats in the Kia Telluride are adjusted using the control switches positioned on the outside of the seat cushion. Before starting the vehicle, set the seat so you can comfortably reach the steering wheel, pedals, and dashboard controls while maintaining a safe driving postu..
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Horn
To sound the horn on your Kia Telluride, press the center section of the steering wheel marked with the horn symbol, as shown in the illustration. The horn functions only when pressure is applied to the designated area of the steering wheel.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Battery replacement
The Kia Telluride smart key is powered by a 3V lithium battery, which typically provides reliable operation for several years under normal conditions. If you are not familiar with replacing the battery or have any concerns about the procedure, contact an authorized Kia dealer for assistance.