Kia Telluride: Forward Collision-avoidance Assist operation / Direct Oncoming function
The Direct Oncoming function of Forward Collision-Avoidance Assist helps monitor vehicles approaching from the opposite direction. In the Kia Telluride, this function may respond through the following operating stages:
-
Collision Warning
-
Emergency Braking
-
Stopping vehicle and ending brake control
Collision Warning
|
|
Collision Warning can alert the driver with a blinking Forward Safety warning light (
), a warning message, an audible warning, and steering wheel vibration when the system identifies a possible direct oncoming collision.
Collision Warning may activate under the following conditions:
-
Your speed is approximately 19-80 mph (30-130 km/h) (*if equipped: 6-80 mph (10-130 km/h)).
-
The oncoming vehicle speed is above approximately 6 mph (10 km/h).
Emergency Braking
|
|
|
Emergency Braking can alert the driver with a blinking Forward Safety warning light (), a warning message, an audible alert, and steering wheel vibration. If the risk continues to increase, the system may apply braking assistance to help reduce collision speed.
Emergency Braking may activate under the following conditions:
-
Your driving speed is approximately 19-80 mph (30-130 km/h).
-
The oncoming vehicle speed is above approximately 6 mph (10 km/h).
-
When the detected object enters the operating range of the Direct Oncoming function.
Stopping vehicle and ending brake control
|
|
|
When Emergency Braking stops your vehicle, a warning message appears on the instrument cluster.
For safety, press the brake pedal immediately and check the vehicle's surroundings before moving again.
Brake control ends approximately 2 seconds after Emergency Braking stops your vehicle.
WARNING
-
If your vehicle or the oncoming vehicle is not traveling straight, the Direct Oncoming function warning and control may be delayed or may not operate.
-
When driving at night, motorcycle detection performance may decrease. As a result, Forward Collision-Avoidance Assist may be temporarily limited or may not operate as expected.
TIP
Press the hazard warning light button to turn the warning sound OFF during Collision Warning and Emergency Braking.
Junction Turning function
The Junction Turning function of Forward Collision-Avoidance Assist is designed to support the driver when turning across oncoming traffic. In the Kia Telluride, this function may operate through the following stages: Collision Warning Emergency Braking Stopping vehicle and..
Junction Crossing function: (if equipped)
The Junction Crossing function of Forward Collision-Avoidance Assist is designed to help the driver when moving through an intersection where another vehicle may approach from the left or right...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Automatic climate control system
The automatic climate control system helps heat, cool, ventilate, and dehumidify the Kia Telluride cabin to provide a comfortable environment for the driver and passengers. Figure 1. Climate control display Figure 2.
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Rear occupant alert (ROA) system
The Rear Occupant Alert (ROA) system is designed to help reduce the possibility of unintentionally leaving a passenger or belongings in the rear seating area of your Kia Telluride. For accurate operation, make sure all windows are completely closed while the ROA system is active.